Two people can easily put up our tents. With the help of compressed air from a cylinder or an electric blower, the tents can be set up in a few minutes with no additional help, such as poles.
The tents are made of high-quality, tough material (PVC-coated or Ripstop fabric) which is watertight and rot and flame resistant. The standard colours of red and grey provide for natural light in the tent‘s interior. The tent‘s long sides are equipped with fasteners for banners. The tent floor is attached to the tent skin and is protected by an integrated anti-fouling seam. Besides the pre-assembled guy lines, there are also large anchoring flaps with grommets for tent pegs, among other things. Medical materials can be hung from the ties on the air chambers. All tents have zippers to allow tents to be joined together with adapter sheets. Particularly suitable as connection tents are the models InflaTec Easy 16 P and 36 P, both of which have four entries.
Each tent is delivered with a standard accessory set, its size depending on the size of the tent. The electric blower or inflating system has to be ordered separately. We can fill special orders for different colours, sizes and printed banners.
InflaTec Easy 20 P
WM 1AFAZ020PVC
- Two entries
- Four windows (two per entry side)
- Internal dimensions (L x W x H): 4.50 x 4.50 x 2.70 m
- External dimensions (L x W x H): 4.50 x 4.90 x 2.95 m
- Packing size: ~ 1.10 x 0.80 x 0.40 m
- Weight: ~ 90 kg
InflaTec Easy 30 P
WM 1AFAZ030PVC
- See InflaTec Easy 20 P
- Internal dimensions (L x W x H): 6.00 x 5.00 x 2.70 m
- External dimensions (L x W x H): 6.00 x 5.50 x 2.95 m
- Packing size: ~ 1.20 x 0.90 x 0.45 m
- Weight: ~ 140 kg
InflaTec Easy 40 P
WM 1AFAZ040PVC
- See InflaTec Easy 20 P
- Internal dimensions (L x W x H): 8.40 x 5.30 x 2.70 m
- External dimensions (L x W x H): 8.40 x 5.70 x 2.95 m
- Packing size: ~ 1.20 x 0.90 x 0.50 m
- Weight: ~ 160 kg
Standard accessory kit
Quantities vary according to tent size. The standard set of
accessories is always ready for use.
- Transport and storage bag
- Tent pegs
- Club hammer
- Repair kit
- Instructions for use and maintenance
All tents are also available in Ripstop-fabric.
Packing dimensions and weight upon request
InflaTec Easy 16 P (Center Point Tent)
WM 1AFAZ016PVC
- Four entries
- Eight windows (two per entry side)
- Internal dimensions (L x W x H): 4.00 x 4.00 x 2.60 m
- External dimensions (L x W x H): 4.40 x 4.40 x 2.80 m
- Packing size: ~ 1.20 x 0.80 x 0.40 m
- Weight: ~ 90 kg
InflaTec Easy 36 P (Center Point Tent)
WM 1AFAZ036PVC
- See InflaTec Easy 16 P
- Internal dimensions (L x W x H): 6.00 x 6.00 x 2.60 m
- External dimensions (L x W x H): 6.00 x 6.00 x 2.90 m
- Packing size: ~ 1.20 x 0.80 x 0.60 m
- Weight: ~ 160 kg
Accessories
Standard electric blower
WM 1AFAIS910004
To inflate and deflate inflatable tents, with hose set
- 240 V / 50 - 60 Hz, 0.96 kW
- Dimensions: 0.30 x 0.21 x 0.26 m
- Weight: 7.8 kg
Electric turbo blower
WM 1AFAIS910005
To inflate and deflate inflatable tents, with hose set
- 240 V / 50 - 60 Hz, 2 x 0.96 kW
- Dimensions: 0.40 x 0.34 x 0.39 m
- Weight: 16 kg
Pressurized Air Inflation System
WM 1AF900029
Consists of:
- 6 l/300 bar pressurized air cylinder
- pressure reducer
- connection hose
Adapter sheet
WM 1AFZZ000PVC
Connects two rescue tents with zip closure, made of PVC-coated fabric, red.
Energy-saving light
WM 1AFAIS920003
Work light with three-pin plug, Protection category IP 54, 2x 36 W (2x 18 or 2x 55 W upon request), Output: ~ 5.800 Im
Tent heater
Diesel K 25 T
WM 1AF960013
Oil heat conserving system including two hot-air spiral hoses (each 7.6 meters in length), exhaust pipe, hood for exhaust pipe and damp-room thermostat with 10-meter connection cable and ingress protection IP 54.
Electrical connection: 230 V
Tank capacity: 35 litres
Heat output: max. 27 kW
Dimensions (L x W x H): 1100 x 580 x 700 mm
Weight: 85 kg
Other accessories for inflatable tents upon request
Liners for InflaTec 16 P and 36 P upon request